Index > PRODUCT > PSU > MaxPlatinum 1375/1700
PRODUCT_PIC
  • 1700W
    • Surpass 80 Plus Platinum level, achieving 93% efficiency (230VAC, 50% load)
    • Continuous full power; P1700 with up to 1800W peak output and P1375 peak to 1600W
    • Full modular cable design with flat peripheral cables simplifies the installation of PSU and cable management
    • 135mm ball bearing fan with thermal speed control delivers silent and durable cooling performance
    • High density PCB makes PSU only 18cm in depth, providing extra room to dissipate the heat inside chassis
    • Full Bridge topology with Zero Voltage Switch (ZVS) circuitry help PSU achieve high efficiency
    • Solid state capacitors and 105°C Japanese grade A capacitors offer great reliability & longer lifespan
    • Intel Haswell fully supported by DC to DC converter design, which ensures the stability of output voltage when CPU goes into C6/C7 power states
    • Multiple +12V rails with high maximum loads give great compatibility with heavy-duty graphics cards
    • Able to run 4-way GPU (SLI / CrossFireX) and dual CPUs together without difficulty
    • Comply with EU 2013 ErP Lot 6 standards (lower than 0.5W power consumption at standby mode)
    • System safety assured by comprehensive protection of Over Power, Over Voltage, Under Voltage, Over Current, Over Temperature, and Short-circuit
    • ATX12V version 2.4 and EPS12V version 2.92 compliant 
       
        
                  

       
     
     
     105°C Japanese Capacitors


    Over Power, Over Voltage,
    Under Voltage, Over Current, Over
    Temperature, Short-circuit protection
    DC-to-DC Converter Design







     

    Model
    P1375-MA
    P1700-MA-EU
    AC Input
    Voltage
    110-240VAC,
    50-60Hz, 14.5-6.5A
    220-240VAC,
    50-60Hz, 9-8A
    DC Output
    +3.3V
    24A
    120W
    25A
    140W
    +5V
    24A
    25A
    +12V1
    20A
    1374W
    (114.5A)
    20A
    1692W
    (141A)
    +12V2
    20A
    20A
    +12V3
    30A
    30A
    +12V4
    30A
    30A
    +12V5
    30A

    30A

    +12V6
    30A
    30A
    -12V
    0.5A
    6W
    0.5A
    6W
    +5Vsb
    3A
    15W
    4A
    20W
    Total Power
    1375W
    1700W
    Peak Power
    1600W
    1800W
    PSU Dimension
    180(D) x 150(W) x 86(H) mm







    Trigger Range / Status
    Model No. 
    P1375-MA / P1700-MA-EU
    DC Rail
    +3.3V
    +5V
    +12V1-V6
    Over Current Protection
    30-45A
    30-45A
    40-55A
    Over Voltage Protection
    3.9-4.5V
    5.7-6.5V
    13.3-14.5V
    Under Voltage Protection
    2.0-2.4V
    3.3-3.7V
    8.5-9.5V
    Over Power Protection
     110~160% of rated max load
    Over Temperature Protection
     100~125°C from main transformer core (P1375-MA)
    100~130°C from main transformer core (P1700-MA-EU)
    Short-circuit Protection
    Main output power shall latch into shut down state within 50ms when short circuit applied


     




         This product incorporates multiple 12V rails over current protection.
    If you let many peripherals consume the power on only one 12V rail, it may trigger the over current protection and shut down the system. Please re-direct certain peripheral power cable to other 12V rail to share the current loading to ensure highest stability and safety.






     
     
    1
    24P Mainboard 4P CPU 8P CPU 6+2P (8P)PCI-E SATA 4P Molex Floppy
     P1375-MA 1 1 2 8 14 10 2

     P1700-MA-EU

    1 1 2 10 14 10  2



    Notice:
    If you plan to put in 2 or more high end, power demanding GPU cards, please choose the motherboard that comes with extra 4P Molex/ 4P FDD / 6P PCI-E power socket(s) on board and connect them with your power supply. This will prevent the motherboard from overloading and possibly causing damage to your system including your power supply. The damage to the motherboard and the power supply caused by failing to do the above instruction will not be covered under Lepa manufacturer’s warranty. Please refer to your motherboard’s user manual to configure your system properly to prevent damage to your system and your power supply.

    Please only use the modular cable provided in your LEPA power supply package. Do NOT use other modular cables to prevent pin configuration damage to your system and your power supply